DTF Transfers near me | Hiram, GA
Stop wondering where to buy dtf transfers and start increasing your profits.
Order your DTF heat transfers in gang sheets or by image size. Use our free gang sheet builder or upload your own gang sheet. Design your transfers for free in the online designer.
In order to achieve the highest-quality DTF prints, please follow the artwork guidelines below
USA DTF Transfers are hot peel so you can finish orders quickly. An initial 10 second press at 300° with a second press of 5 seconds is all that is required.
Raise your profits by saving on labor and material cost involved in other decorating methods.
DTF Artwork Guidelines
The higher the resolution of your artwork, the better your print can look. We recommend using 300 DPI to avoid jagged edges on curves. DTF sees soft edges on a design and will attempt to underbase the faint pixels. This will result in a haze around your image. Your original artwork needs to be created at 300 dpi. Otherwise, you won't be able to up the resolution and keep the quality. The default dpi when you create a Photoshop document is 72 dpi. Make sure to set the dpi to 300 when you create your new document.
DTF transfer printing does a great job of matching pantone colors. Saving your file as a png will help ensure that your pantone colors will match as closely as possible.
Expanding or zooming in on artwork causes jaggy curves. Create your designs at the size they’ll be printed.
Make sure your artwork do not have extra space around your image. If your art is 10x10, make the artboard/page size the same dimension. Doing this will ensure there's no extra space. You will be charged for the extra space. If you need help let us know.
Artwork line thickness should be at least 0.02 in. (0.5mm) or thicker. If your lines are thinner than this, they will not stick or stay on.